SCM Series Fine Powder Grinding Mill
SCM series super thin mill is on the bases of our company’s production experience for more than 15 years. We absorb advantags from the same trade abroad and at home. We review, research and try on 12 kinds of mills and horizontal hammer crushers. And finally we developed this high-efficiency and low-cost super thin mill by investigation and trial.
This grinding mii is a equipment which produces thin powder and super thin powder. It is applicable to non-flammable and non-explosive materials with hardness less than 6, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, talcum, talc, magnesite, illite, pyrophyllite, vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alum earth, graphite, fluorite, variscite, potash ore, floatstone.
Structural characteristic and working principle:
The whole system of the flour mill consists of main unit, deceleration machine, classifier, blower, hammer crusher, dustpan elevator, electro-magnetic vibrating feeder, impulse dust cleaner, piping device, cyclone collector device, classifier, high-pressure motor and muffler.
SCM series S super thin mill Technic parameter:
| Product Item Name | SCM6015 | SCM8021 | SCM10027 |
| Number of Roller (piece) | 15 | 21 | 27 |
| Ring Diameter (mm) | Φ600 | Φ800 | Φ1000 |
| Number of Ring (piece) | 1 × 3 | 1 × 3 | 1 × 3 |
| Main Equipment rotate speed (r/min) | 235 | 235 | 173 |
| Max. Inlet size(mm) | ≤10 | ≤10 | ≤10 |
| Final size (mesh) | 325~2500 | 325~2500 | 325~2500 |
| Capacity (kg/h) | 350~2500 | 600~4000 | 900~6800 |
| Overall Size (m) | 10×2.3×5.5 | 13×3×5.8 | 18×4×8.6 |
| Name | Item | Unit | Specification and Technical Data | ||
| SCM6015 | SCM8021 | SCM10027 | |||
| Motor of Main Machine | Model | Y225S-4 | Y250M-4 | Y315S-4 | |
| Power | Kw | 37 | 55 | 110 | |
| Classifier frequency modulation motor | Model | Y160M-4 | Y180M-4 | Y200L1-4 | |
| Power | Kw | 11 | 18.5 | 30 | |
| Motor of Elevator | Model | Y100L-4 | Y100L-4 | Y100L-4 | |
| Power | Kw | 3 | 3 | 3 | |
| Motor of Blower | Model | Y200LI-2 | Y225M-2 | Y280M-2 | |
| Power | Kw | 30 | 45 | 90 | |
| Hammer Crusher | Model | PC250×400 | PC300×400 | PC400×600 | |
| Power | Kw | 15 | 15 | 18.5 | |
| Vibrating Feeder | Model | GZ1F | GZ1F | LS180×1050 | |
| Power | Kw | 0.06 | 0.06 | 22 | |
| Discharge Valve | Model | ZJD-1:40 | ZJD-1:40 | ZJD-1:40 | |
| Power | Kw | 0.75 | 0.75 | 0.75 | |
| Pulsed Duster | Model | DMC72-II | DMC120-II | DMC184-II | |
Note: This specification is just reference, any changes are subject to the products.
